EKWB EK-Quantum Vector XC3 RTX 3070 D-RGB GPU Water Block - Nickel + Plexi

EKWB EK-Quantum Vector XC3 RTX 3070 D-RGB GPU Water Block - Nickel + Plexi

×

EKWB EK-Quantum Vector XC3 RTX 3070 D-RGB GPU Water Block - Nickel + Plexi

£140.34 £116.95
  • Designed for EVGA® XC3 RTX 3070 graphics cards
  • Directly cools the GPU, VRAM, and the VRM
  • Features optimized flow paths that reduce hydrodynamic instabilities and vortexing
  • Uses an Open Split-Flow cooling engine design
  • Characterized by low hydraulic flow restriction
Availability: Out of stock
SKU
EK-GPU-QNTM-V-XC3-RTX-3070-NP

EK-Quantum Vector XC3 RTX 3070 D-RGB

 

 

 

Check your compatibility

 

Download your installation manual

 

 

 

This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for EVGA® XC3 RTX 3070 graphics cards based on the latest NVIDIA® Ampere™ architecture. For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator.

 

EK-Quantum Vector XC3 3070 D-RGB water block is compatible with EVGA XC3 RTX 3070 graphics cards.

 

The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with the power stages and inductors of the VRM.

 

These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. Additionally, this new design allows the terminal to be screwed directly onto the copper cold plate of the GPU block, making it more rigid and reducing the chances of damaging the water block.

 

The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation.

 

Fin array is populated by 27 microfins with 0.5mm wide microchannels that provide optimal cooling performance, without unnecessary flow restrictions or clogging hazards.

 

The base of the block is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature plexi terminals that match the top cover. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure.

 

The aesthetic end-piece is housing the addressable D-RGB LED strip. This water block boasts a total of 5 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header.

 

EK recommends the purchase of a retention backplate. The backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, VRAM, and backside of the printed circuit board VRM section.

 

 

Technical Specification:

 

 

- Dimensions: (LxHxW) - 277x125x22mm

- D-RGB cable length: 500mm

- D-RGB LED count: 5

- D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)

 

Enclosed:

 

- EK-Quantum Vector XC3 RTX 3070 D-RGB series high-performance water block

- Mounting mechanism with screw-in brass standoffs

- Necessary mounting screws, nuts, and washers

- 2x Nickel plated brass plug G1/4”

- EK-Loop Multi Allen Key (6mm, 8mm, 9mm)

- Thermal pads

- Thermal grease EK-TIM Ectotherm (1g)

 

 

Please Note:

- Due to the immense variety of fittings/barbs available on the market, we guarantee compatibility only with EK fittings.

- Factory backplates are not compatible with this water block!

- Check your toolbox if you are missing this special Hex adapter for some of the screws.

- This product should NOT be installed with any aluminum Fluid Gaming parts!

- The use of specifically engineered coolants that contain corrosion, scale, and biological inhibitors is mandatory to prevent damage to your nickel plated water block! EK is offering a selection of such products in the coolants section.

More Information
Is Discontinued No
Brand EK Water Blocks
UPC/EAN 3831109836552
Write Your Own Review
You're reviewing:EKWB EK-Quantum Vector XC3 RTX 3070 D-RGB GPU Water Block - Nickel + Plexi

Products from the same brand

D-RGB Cable Length
500 mm
D-RGB LED Count
5
D-RGB Connector Standard 3-pin (+5V, Data, Blocked, Ground)
Material/Design/Colour Nickel Plexi
Threads G1/4"
Chip Manufacturer Nvidia GeForce